papermaking

Skiving is the process of thinning leather.
Regardless of the size, we accept one sheet for ¥ 770 (tax included).
Since it is sent to a paper processing company, it takes about a week from ordering to shipping.

Please fill in the desired thickness and division method in the remarks column.
When dividing, please specify vertical or horizontal division.

Also, when ordering multiple leathers, please clearly indicate the desired thickness for each leather.
One piece of leather can be divided into two or three parts and sent to the skiving process.
If you divide it into two pieces and send them to the papermaking process, please add the quantity to the cart with "2 pieces".
If you divide it into 3 parts, and send 1 sheet to the original thickness and 2 sheets to the papermaking process, please add the quantity to the cart with "2 sheets".

The thinnest is 0.8mm. Please specify the finished thickness in 0.1mm increments.
*If the difference between the original thickness and the finished thickness is 0.2mm or less, the paper cannot be skived.
*Because the thickness of each piece of leather varies slightly, if the difference between the original thickness and the finished thickness is small, there is a possibility that there will be a side that has been covered by the blade of the skiving machine and a side that has not been cut (unevenness).

・We will put a 12 x 35 mm sticker on the edge of the leather (where it seems to have little effect on parts removal) to prevent mistakes in the front and back (surface to be left) of the paper processing company.

・Depending on the contents of your order, we may ask you to confirm it by phone.
・Since we will ask a paper processing company, it will take about a week for the delivery date.
・In addition, depending on the processing company's situation, it may take some extra days.
Thank you for your understanding.
・In the case of bank transfer, arrangements will be made after payment has been confirmed.

■We cannot compensate for damage, stains, errors in finished thickness, etc. Please make a request after acknowledging the following precautions.
Also, depending on the thickness of the paper, unevenness may occur. Thank you for your understanding.

■ Thickness There may be an error of ±0.1 to 0.2 mm depending on the part of the leather. Please note.

■About split leather If the difference between the original thickness and the finished thickness is less than 1.0mm, no split leather will be produced.
Also, please note that split leather may not occur due to the circumstances of the processor even if the thickness is sufficient for calculation.
*If you don't know "floor leather", please refer here.